Power Distribution Unit (PDU) is a reliable and cost-effective device to deliver power from a UPS system, generator, or utility source to multiple equipment by a single input with multiple output outlets. Rack mount power strip is the most basic PDU. They both supply power to the cabinet. But they have some differences. What’s the differences of upgraded PDU vs power strip? Continue to read this article.

What Is PDU

A PDU is a device fitted with multiple outlets. A PDU delivers AC power from power source to severs. PDU can be installed into a big cabinet with a power cord to transmit electric power to the computers and networking equipment located within a data center. Power cord can power a network device or connect to the PDU and computer in a data rack or network wiring closet. And C13 power cord is the best choice for PDU. In general, PDU is developing all the time. In the beginning, PDU is a simply and cheap rack mount power strip and then become larger floor mount PDUs with multiple functions.                                           

Basic Introduction of Power Strip

Rack mount power strip is an electronic device that makes it possible for people to charge multiple electronic device at the same time. Power strip which we can also call it power bar or power board is a device with a block of charging stations. Power strip is often connected with the end of a flexible cable(a mains pug) and then you can plug it into the wall or other place. It has a long power cord that can be used anywhere. It is extremely convenient.

The Difference Between PDU and Power Strip

PDU can be installed in equipment racks which keep power within reach of rack mounted devices like severs, switches, routers, or cooling fans. The installation of PDU is more flexible and convenient which can be suitable for customer who is very strict about it. And PDUs are often used in data center, network closets and industrial environments. In addition, PDU can be for in-depth power management and monitoring. Power strip are widely used both at home and office for audio, video, computer system, appliances, lights, business and other appliances.

Compared with power strip, PDU is designed more reasonable. It has more strict quality and standard. PDU can work over a long time without any problem. If you use PDU for a long time, you never worry about heat.

PDU has fundamentally eliminated the potential safety problems such as frequent power failure, burnout and fire caused by poor contact and low load. While a power strip fails to contribute functions what PDU can.

Conclusion

From this article, we know the basic knowledge about the PDU and rack mount power strip. Each kind of PDU can help data centers to improve monitoring and reduce operation costs. To choose basic PDU or other types of PDU, it totally depends on your own needs. If you want to purchase PDU, you can visit FS.COM.

:: بازدید از این مطلب : 22

|

امتیاز مطلب : 3

|

تعداد امتیازدهندگان : 1

|

مجموع امتیاز : 1

As we all know, Cisco switches and fiber optic transceivers are considered as the benchmarks of the market. With the development of optical transceiver, Cisco has built a system to name each transceiver. For example, we often find Cisco C-class 10G transceiver like SFP-10G-LR. But there are S-class transceivers like SFP-10G-LR-S. You may be confused about their difference. That is why you should read this article. I will show you both of them and then make a comparison between SFP-10G-LR-S and SFP-10G-LR.

Basic Knowledge About SFP-10G-LR-S

SFP-10G-LR-S transceiver provides 10GBase-LR throughput up to 10 km over single mode fiber at a wavelength of 1310 nm using an LC duplex patch cable. SFP-10G-LR-S can be applied in enterprise and data center in which don’t require very long distance, temperature tolerances, or other special conditions. SFP-10G-LR-S can also support DOM which can help the administrator to monitor and make feedback of the operation of transceivers, including the temperature, the bias current of the laser diode and so on.

An Introduction of SFP-10G-LR

SFP-10G-LR transceiver is an LC duplex SFP+ transceiver for optical communications, rated for distances up to 10 km and a maximum bandwidth of 10Gbps. “LR” means long distance. The SFP-10G-LR transceiver operates at 1310nm wavelength. It can also support DOM, which is the same as SFP-10G-LR-S. DOM can provide more convenience for monitoring and operating as mentioned before.

SFP-10G-LR-S vs SFP-10G-LR

From their appearance and definition, SFP-10G-LR-S and SFP-10G-LR may be the same, but actually they have some differences in their protocols, temperatures and price.

SFP-10G-LR can support three protocols including Ethernet, OTN(Optical Transport Network) and WAN-PHY(Wide Area Network Physics). However, SFP-10G-LR-S can just support Ethernet protocol. In addition, SFP-10G-LR-S does not have TAA compliance.

SFP-10G-LR-S and SFP-10G-LR transceivers have different temperature ranges. But the operating temperature range of SFP-10G-LR-S is smaller, so SFP-10G-LR-S is better for shorter transmission distance applications than SFP-10G-LR. If you design a project for an enterprise or data center environment that does not need too long distance, temperature tolerances, or other special request, SFP-10G-LR-S should be just fine for you.

Compared with SFP-10G-LR, SFP-10G-LR-S doesn't have too many specials. And the performance of SFP-10G-LR-S are no better than that of SFP-10G-LR. But why do so many people insist to select SFP-10G-LR-S? This is because SFP-10G-LR-S has lower prices.

Conclusion

From this this article, we know that SFP-10G-LR is different from SFP-10G-LR-S in the sides of protocols, temperature ranges and price. Except the C-class and S-class SFP+ transceivers introduced in this article, there are still SFP-10G-SR and SFP-10G-SR-S transceiver. You can visit FS.COM for more information and choose the one fit for your needs.

:: بازدید از این مطلب : 30

|

امتیاز مطلب : 0

|

تعداد امتیازدهندگان : 0

|

مجموع امتیاز : 0

With the development of fiber optic transceiver, SFP transceiver have been occupying a big share in the market. SFP transceiver which is a compact, hot-pluggable optical transceiver is known as small form-factor pluggable or mini GBIC (gigabit interface converter). It is widely used for both telecommunication and data communications applications. This article will introduce one type of SFP—RJ45 SFP and take a comparison between RJ45 SFP and optical SFP.

An Introduction of RJ45 SFP

RJ45 SFP is a high performance integrated duplex data link for bi-directional communication over Category 5 copper cable. It is fully complied with the SFP Multi-Sourcing Agreement (MSA), IEEE802.3u and IEEE802.3ab. The specification of RJ45 SFP has been optimized to save more port power. And then, we will talk its feature and some applications after these basic introduction.

The Feature and Application of RJ45 SFP

The maximal cable distance is 100m and its maximal data rate can be up to 1000Mbps. Then it has low power dissipation. And its commercial temperature ranges from 0°C to +70°C. The compatibility with existing structured cabling devices and existing low-speed devices of RJ45 SFP makes it uniquely suited for widespread deployment of Gigabit Ethernet. Broad deployment on RJ45 SFP will simplify data center infrastructures, making it easier to manage server and storage connectivity. At last, the shell of it is fully metallic which can protect it from EMI. It can be applied in networking switches and routers.

RJ45 SFP VS Optical SFP

In this paragraph, we will make a comparison between RJ45 SFP and optical SFP. The two kinds of SFPs have some similarities. The maximal data rate of RJ45 SFP can reach up to 1000Mbps which is the same as optical SFP and there is no difference for the operating temperature of RJ45 SFP and optical SFP. Except that, they have some differences.

At first, the RJ45 SFP interfaced with RJ45 connector operates on standard Cat5 unshielded twisted-pair copper cabling. The maximal cable distance of RJ45 SFP is up to 100m. And the maximal cable distance of optical SFP is longer than RJ45 SFP which can be up to 10km or more over duplex LC fiber patch cable. Since optical SFP offers different wavelengths and optical power budget to allow more longer distance. If we want longer transmission distance, we can choose optical SFP rather than RJ45 SFP. From this point, optical SFP offers the substantial advantages over RJ45 SFP. Secondly, when we turn to the security, optical SFP is safer than RJ45 SFP. Because fiber does not conduct electricity. Finally, the price of RJ45 SFP is more expensive than optical SFP.

Conclusion

We can have a general understanding of RJ45 SFP after this article. Comparing RJ45 SFP VS optical SFP, we can see that each technology has its own set of advantages and disadvantages. From the introduction of their transmission distance, operating temperature, security and price, you must get the idea of how to choose a suitable one.

:: بازدید از این مطلب : 53

|

امتیاز مطلب : 0

|

تعداد امتیازدهندگان : 0

|

مجموع امتیاز : 0

With vast demanding of the higher bandwidth and faster speed, the growth of single mode fiber optic cable market has enhanced over the past several years. Maybe there are still a lot of people who do not know what single mode fiber optic cable is and why it can improve the development of the network communication. So the following article will solve all your problems. This article will focus on its definition, types, advantages and disadvantages.

The Definition of Single Mode Fiber Optic Cable

Single mode fiber (SMF), is an optical fiber that is designed for the transmission of a single ray or mode of light as a carrier to propagate at a time. Single mode fiber optic cable core is 8 to 9 micons which is about one-tenth of a human hair. So the core diameter of single mode fiber optic is smaller than multimode fiber optic cable. But it can provide higher transmission speeds and higher information transmission capacity.

Single Mode Fiber Optic Cable Types: OS1 VS OS2

From “Fiber Optic Cable Brings to a New Era of Network,” we can know that fiber optic cable is divided into two kinds—single mode fiber optic cable and multimode fiber optic cable. As we know, multimode fiber optic cable is usually divided into OM1, OM2, OM3, OM4 and OM5 fiber types. And what about single fiber optic cable? According to SMF specifications, single fiber optic cable can be categorised into OS1 and OS2. The main difference between OS1 and OS2 single fiber optic cable is the cable constructions. In general, OS1 cabling is tight-buffered which can be used for indoor applications. On the contrary, OS2 cabling is loose-tube design which can be used for outdoor applications. The maximum transmission distance of OS2 single mode fiber optic cable is up to 10 km but OS1 single mode fiber optic cable can just reach 2km. Both OS1 and OS2 fiber optic cable allow a distance of gigabit to 10G Ethernet. Besides, OS2 fiber can support 40G and 100G Ethernet.

Single Mode Fiber Optic Cable: Advantages and Disadvantages

Single mode fiber optic cable is perfect for long distance transmission and has greater bandwidth capacity than multimode fiber optic cable. The use of single mode fiber cable can limit data dispersion and external interference. Single mode fiber cable has fast transmission speed which can support data transmission speed up to 10Gbps, 40Gbps, 100Gbps.

Due to smaller core diameter, coupling light into the core is more difficult. Besides, compared with multimode fiber optic cable, single mode fiber optic cable costs more.

Conclusion

The use of single mode fiber optic cable realizes signal transmission over long distance. So it is popular to be widely applied in some places, like data center, CATN, FTTH, WDM/DWDM. As we talk above, it has two types of single fiber optic cable for you to choose. If you want to use it indoor, you can choose OS1, or if you want to use it outdoor, you can choose OS2. There will always be one for you.

:: بازدید از این مطلب : 41

|

امتیاز مطلب : 0

|

تعداد امتیازدهندگان : 0

|

مجموع امتیاز : 0

The world of telecommunications is rapidly moving from copper wire networks to fiber optics. Different from copper wire, fiber optic cable provides one of the most effective means today for safe and long-distance, and it also offers a number of advantages for us. For example, it can reduce the electrical fires in the transmission which is different from copper wire. Because they transfer information using light which do not cause electromagnetic interference. Fiber optic cable brings us so many benefits, and do you know what fiber optic cable is, how many kinds it has. This article will introduce everything about fiber optic cable.

What Is Fiber Optic Cable?

Fiber optic cable contains core, cladding, coating, strengthening member and outer jacket. The core of fiber optic cable carries the actual light signal and the cladding is a layer of glass surrounding the core. The outer jacket provides for the shielding and conductors within the cable because of the fragility of the bare fiber. Fiber optic cable is a very thin strand of pure glass which acts as a waveguide for light over long distances. It uses a principle known as total internal reflection. From this description, we know the basic information about fiber optic cable. We will divide fiber optic cable into two categories in the following part.

The Types of Fiber Optic Cable: Single Mode and Multimode

In fiber optic communications, single mode and multimode fiber constructions are used depending on the application. In single mode fiber optic cable, only one mode is propageted “straight” through the fiber. In multimode fiber optic cable, light travels through the fiber following different light paths called “mode.”

Single mode fiber optic cable can transmit information with higher capacity. Compared to multimode fiber, it can keep the fidelity of each light pulse over long distance, and it exhibits no dispersion caused by multiple modes. Single mode fiber optic cable also exhibits lower fiber attenuation than multimode optic cable fiber. So it can transmit more information at the same time. Because of smaller core diameter, coupling light into the core is more difficult. Tolerances for single mode connectors and splices demand more. There is another important feature—single fiber optic cable ensure the great performance of system based on its nonlinearities.

Multimode core diameters are much bigger than single mode fiber, and it can transfer more light. Multimode core is set up with multiple rings with different refractive light indexes. These rings allow the light to travel over longer distance without loss of continuity. Multimode fiber optic cable are less expensive and easy to work with. Multimode fiber provides high bandwidth at high speeds like single mode. But transmission distance is shorter than that of single mode fiber. The key benefit of multimode fiber optic cable is the inexpensive electronics used to terminate the fiber.

Conclusion

Fiber optic cable is used to connect servers and users in a variety of network settings and also help in increasing the accuracy and speed of data transmission. Fiber optic cable is divided into two kinds: single mode fiber optic cable and multimode fiber optic cable. Single mode fiber optic cable can transmit signal over a long distance but it is expensive. Multimode fiber optic cable is cheaper but it can just transmit signal over a shorter distance. Two kinds of fiber optic cable can satisfy the different demand of customer.

:: بازدید از این مطلب : 36

|

امتیاز مطلب : 0

|

تعداد امتیازدهندگان : 0

|

مجموع امتیاز : 0

With the constantly updating network, 10G transceiver is appearing in order to provide a better channel for 10 Gigabit Ethernet. But then 10 Gigabit Ethernet can not satisfy people to pursuit the faster data transmission rate, so there comes 40 Gigabit Ethernet. 40 Gigabit Ethernet is a standard that enables the transfer of Ethernet frames at speeds of up to 40 gigabits per second(Gbps). 40G QSFP+ transceivers are designed for 40 Gigabit Ethernet try to keep up with the continuous development of the network. And how many do we know about 40G QSFP+ Transceiver? The next paragraph will answer this question.

What Is 40G QSFP+ Transceiver?

40G QSFP+ transceiver is a product developed on the basis of 40G QSFP transceiver. 40G QSFP transceiver has four independent full duplex transceiver channels, and is a four channel minitype plugable optical transceiver. It is used for high-density applications. Compared with the traditional SFP+ optical transceiver, the port density is higher and the cost of whole system is lower. 40G QSFP+ transceiver conforms to various standards such as SCSI, 40G Ethernet, 20G/40G Infiniband and so on. It has four data transmission channels, the transmission rate of each channel is about 10Gbps, and the transmission of four channels can get 40Gbps at the same time. This optical transceiver mainly has two kinds of interfaces: LC and MTP/MPO. They can also be divided into several categories according to the transmission distance: 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4.

Different Types Of 40G QSFP+ Transceiver

We have already knew three kinds of 40G QSFP+ Transceiver in the above. And in this paragraph we will introduce them that mentioned in the last section.

Many vendors use “QSFP-40G-SR4” to identify 40G QSFP+ modules that support by 40Gbase-SR4 standards. 40Gbase-SR4 QSFP+ is the most popular 40G fiber optic transceiver for transmission in short distances, that is, 40GBASE-SR4 QSFP+ module supports link lengths of 100m and 150m, respectively, on OM3 and OM4 multimode fibers. It is a parallel fiber optic transceiver containing an MTP/MPO interfaces, which uses 4*10G transmission pattern.

40GBASE-LR4 QSFP+ transceiver is a parallel single-mode optical transceiver with duplex LC connector. Moreover, it offers four independent transmit and receive channels and each channel is capable of 10G operation for an aggregate data rate of 40G on 10 km of single-mode fiber. The guide pins inside the receptacle could ensure proper alignment. Usually, the cable cannot be twisted for proper channel to channel alignment.

40GBASE-ER4 QSFP+ permit link lengths up to 40km with duplex LC connectors. The 40GE or OTU3 signal is carried over four wavelengths in the 1310nm range. It also offers four independent transmit and receive channels.

Conclusion

As mentioned above, three of 40G QSFP+ transceiver are suitable for different  transmission distance and all have four channels for higher rate transmission. 40GBASE-SR4 QSFP+ transceiver supports MTP/MPO connector which is different from the others. Anyway, they are the same in function to transmit 40G data. In a word, 40G QSFP+ transceiver promotes the development of high-density and high speed signal transmission, which brings the optical communication into a new era.

:: بازدید از این مطلب : 54

|

امتیاز مطلب : 0

|

تعداد امتیازدهندگان : 0

|

مجموع امتیاز : 0

با سلام.به دنیای لوکس بلاگ و وبلاگ جدید خود خوش آمدید.هم اکنون میتوانید از امکانات شگفت انگیز لوکس بلاگ استفاده نمایید و مطالب خود را ارسال نمایید.شما میتوانید قالب و محیط وبلاگ خود را از مدیریت وبلاگ تغییر دهید.با فعالیت در لوکس بلاگ هر روز منتظر مسابقات مختلف و جوایز ویژه باشید.
در صورت نیاز به راهنمایی و پشتیبانی از قسمت مدیریت با ما در ارتباط باشید.برای حفظ زیبابی وبلاگ خود میتوانید این پیام را حذف نمایید.جهت حذف این مطلب وارد مدیریت وب خود شوید و از قسمت ویرایش مطالب قبلی ،مطلبی با عنوان به وبلاگ خود خوش امدید را حذف نمایید.امیدواریم لحظات خوبی را در لوکس بلاگ سپری نمایید...

:: بازدید از این مطلب : 9

|

امتیاز مطلب : 0

|

تعداد امتیازدهندگان : 0

|

مجموع امتیاز : 0